(Proof) Katsuyu's exact size

Erin

Active member
Veteran
Joined
Jan 15, 2013
Messages
4,164
Kin
1💸
Kumi
0💴
Trait Points
0⚔️
Awards
Yup, you were right after all =D
But the difference is still not that significant. ( ~ 389 meters ). At least according to Fizz's calculations.
True, though the statue is also a lot wider and bulkier than katsuya, who is longer than she is wide. :cool:

Well but we don't exactly know how much portion of Katsuyu did Tsunade summon there? Maybe it would have been better to rate the 1/10 of Katsuyu we saw this chapter?(dunno if it's possible though)
I tried that in comparison to the roots, and I came out with it being roughly 50% the total statue.

But those where very rough and based on kishi's scaling, which is off a lot.
 
Last edited:

Bronze

Banned
Legendary
Joined
Jun 8, 2013
Messages
15,769
Kin
0💸
Kumi
0💴
Trait Points
0⚔️
lol you should post it
Lol indeed;
So far Naruto's fans have been saying BM Naruto can take on PS and i would like to show my caculations of PS size in comparison to BM Naruto.

So
Enjoy

PS Compared To 100% Kyuubi
Many people think that PS is actually the same size of 100% kyuubi. well no because if were to caculate the PS Madara used on Gokage, you would see that PS is much larger than 100% Kyuubi. lets start with the body:

You must be registered for see images


as you can see, this is unstabilized PS, but all we can see here is only the upper body which is at least half or less than when it has legs. If we were to calculate the full size of unstabilized PS, this is how big it is:

You must be registered for see images


as you can see, Unstabilized PS is 168m. in a 1 meter = 100cm. so how much does 168m = cm? 16 800 centimetres

Jinton is only half the size of unstabilized PS but if we look at stabilized PS, jinton is a complete insect in front of it:
You must be registered for see images


Jinton is actually smaller than PS knees.

so to caculate the height of PS:

we add unstabalized PS height + jinton height

16 800 (Unstabalized PS) + 7200cm = 2400000cm. That's how big Madara's PS is.

therefore 100% kyuubi size would be:

16800 divided by 2 = 8400 because half of unstabalized PS is the size of 100% kyuubi so complete height of it needs to be halved so we know how tall 100% kyuubi is.

with that being said, Madara had to shrink the size of his PS so so so so much so it can fit the 100% kyuubi. However if we were to take a look at the difference between them, you would see this:

You must be registered for see images

You must be registered for see images


so PS is either twice or bigger than 100% kyuubi.
 

Rainbow Dash

Active member
Elite
Joined
Dec 9, 2012
Messages
9,702
Kin
32💸
Kumi
0💴
Trait Points
0⚔️
Awards
16 800 (Unstabalized PS) + 7200cm = 2400000cm. That's how big Madara's PS is.
16,800 cm + 7,200 cm = 24,000 cm. You added two extra 0's to your final result. Which would make you're final result only 240m, 10x smaller than Katsuyu.

Anyways, your calcs are a little off. PS is much taller than 240m.
 
Last edited:

Bronze

Banned
Legendary
Joined
Jun 8, 2013
Messages
15,769
Kin
0💸
Kumi
0💴
Trait Points
0⚔️
16,800 cm + 7,200 cm = 24,000 cm. You added two extra 0's to your final result. Which would make you're final result only 240m, 10x smaller than Katsuyu.

Anyways, your calcs are a little off. PS is much taller than 240m.
how about you do the calculations please:O. I can see you're very good at maths.
 

Tazzilla88

Active member
Veteran
Joined
Mar 16, 2012
Messages
2,505
Kin
2💸
Kumi
0💴
Trait Points
0⚔️
Lol indeed;
So far Naruto's fans have been saying BM Naruto can take on PS and i would like to show my caculations of PS size in comparison to BM Naruto.

So
Enjoy

PS Compared To 100% Kyuubi
Many people think that PS is actually the same size of 100% kyuubi. well no because if were to caculate the PS Madara used on Gokage, you would see that PS is much larger than 100% Kyuubi. lets start with the body:

You must be registered for see images


as you can see, this is unstabilized PS, but all we can see here is only the upper body which is at least half or less than when it has legs. If we were to calculate the full size of unstabilized PS, this is how big it is:

You must be registered for see images


as you can see, Unstabilized PS is 168m. in a 1 meter = 100cm. so how much does 168m = cm? 16 800 centimetres

Jinton is only half the size of unstabilized PS but if we look at stabilized PS, jinton is a complete insect in front of it:
You must be registered for see images


Jinton is actually smaller than PS knees.

so to caculate the height of PS:

we add unstabalized PS height + jinton height

16 800 (Unstabalized PS) + 7200cm = 2400000cm. That's how big Madara's PS is.

therefore 100% kyuubi size would be:

16800 divided by 2 = 8400 because half of unstabalized PS is the size of 100% kyuubi so complete height of it needs to be halved so we know how tall 100% kyuubi is.

with that being said, Madara had to shrink the size of his PS so so so so much so it can fit the 100% kyuubi. However if we were to take a look at the difference between them, you would see this:

You must be registered for see images

You must be registered for see images


so PS is either twice or bigger than 100% kyuubi.
A few problems I've noted. Just based on all of this data.
In the picture where the gokage are with the Susanoo clones you never took into account that the clones are further than the kages thus you can't use direct scaling than you did. I did the math in another and came up with a bit of a different number.
Given this information, all of your future numbers will change. Which makes sense considering the Raikage is over 2 meters tall yet he is represented as a dot in the scan with the roots. Given your previous measurements the roots would be 27.7m. The Jinton would be 443m. And Your perfect Susanoo would be 1,033.67m assuming your other calculations hold
 
Last edited:

Vegeto30294

Active member
Regular
Joined
Sep 26, 2010
Messages
1,718
Kin
0💸
Kumi
0💴
Trait Points
0⚔️
What I'm having a hard time understand is what makes you think that the Katsuyu that Tsunade summoned in Part I isn't her full size? And even so, how would you know the scale compared to full sized Katsuyu?
 

Bronze

Banned
Legendary
Joined
Jun 8, 2013
Messages
15,769
Kin
0💸
Kumi
0💴
Trait Points
0⚔️
Lol indeed;
A few problems I've noted. Just based on all of this data.
In the picture where the gokage are with the Susanoo clones you never took into account that the clones are further than the kages thus you can't use direct scaling than you did. I did the math in another and came up with a bit of a different number.
Given this information, all of your future numbers will change. Which makes sense considering the Raikage is over 2 meters tall yet he is represented as a dot in the scan with the roots. Given your previous measurements the roots would be 27.7m. The Jinton would be 443m. And Your perfect Susanoo would be 1,033.67m assuming your other calculations hold
meh i guess you're right. Kishi isn't really accurate every time with his drawing sometimes so i was forced to choose the scans that helps my arugment and calculate them.
 

AGoodBoy

Active member
Elite
Joined
Feb 9, 2013
Messages
8,028
Kin
0💸
Kumi
0💴
Trait Points
0⚔️
Quite large, but still smaller than the Shinsuusenju.
Shinshuu is 1-1.5Km.......... Yu just proved katsuya is about double Shinshu. I've calculated shinshu, so did you in another thread, and some other guy. All values came out to roughly 1Km when rounded off. You just showed katsuya is 2.5Km.

:vincent:

tl;dr; Length wise, Katsuya seems to be about 2x the size of shinshuu.

Side note: 10km C0 still > Katsuya > Juubi > Shinshuu > PS in size XD
 
Top