No, we haven't . Read the new chapter.we already seen the full katsuyu summoning already
No, we haven't . Read the new chapter.we already seen the full katsuyu summoning already
True, though the statue is also a lot wider and bulkier than katsuya, who is longer than she is wide.Yup, you were right after all =D
But the difference is still not that significant. ( ~ 389 meters ). At least according to Fizz's calculations.
I tried that in comparison to the roots, and I came out with it being roughly 50% the total statue.Well but we don't exactly know how much portion of Katsuyu did Tsunade summon there? Maybe it would have been better to rate the 1/10 of Katsuyu we saw this chapter?(dunno if it's possible though)
lol you should post itBased on the Maths i have done on Perfect Susanoo size, Katsuya full size is still much smaller.
Lol indeed;lol you should post it
So far Naruto's fans have been saying BM Naruto can take on PS and i would like to show my caculations of PS size in comparison to BM Naruto.
SoEnjoy
PS Compared To 100% Kyuubi
Many people think that PS is actually the same size of 100% kyuubi. well no because if were to caculate the PS Madara used on Gokage, you would see that PS is much larger than 100% Kyuubi. lets start with the body:
You must be registered for see images
as you can see, this is unstabilized PS, but all we can see here is only the upper body which is at least half or less than when it has legs. If we were to calculate the full size of unstabilized PS, this is how big it is:
You must be registered for see images
as you can see, Unstabilized PS is 168m. in a 1 meter = 100cm. so how much does 168m = cm? 16 800 centimetres
Jinton is only half the size of unstabilized PS but if we look at stabilized PS, jinton is a complete insect in front of it:
You must be registered for see images
Jinton is actually smaller than PS knees.
so to caculate the height of PS:
we add unstabalized PS height + jinton height
16 800 (Unstabalized PS) + 7200cm = 2400000cm. That's how big Madara's PS is.
therefore 100% kyuubi size would be:
16800 divided by 2 = 8400 because half of unstabalized PS is the size of 100% kyuubi so complete height of it needs to be halved so we know how tall 100% kyuubi is.
with that being said, Madara had to shrink the size of his PS so so so so much so it can fit the 100% kyuubi. However if we were to take a look at the difference between them, you would see this:
You must be registered for see images
You must be registered for see images
so PS is either twice or bigger than 100% kyuubi.
16,800 cm + 7,200 cm = 24,000 cm. You added two extra 0's to your final result. Which would make you're final result only 240m, 10x smaller than Katsuyu.16 800 (Unstabalized PS) + 7200cm = 2400000cm. That's how big Madara's PS is.
how about you do the calculations please:O. I can see you're very good at maths.16,800 cm + 7,200 cm = 24,000 cm. You added two extra 0's to your final result. Which would make you're final result only 240m, 10x smaller than Katsuyu.
Anyways, your calcs are a little off. PS is much taller than 240m.
Lol indeed;
A few problems I've noted. Just based on all of this data.So far Naruto's fans have been saying BM Naruto can take on PS and i would like to show my caculations of PS size in comparison to BM Naruto.
SoEnjoy
PS Compared To 100% Kyuubi
Many people think that PS is actually the same size of 100% kyuubi. well no because if were to caculate the PS Madara used on Gokage, you would see that PS is much larger than 100% Kyuubi. lets start with the body:
You must be registered for see images
as you can see, this is unstabilized PS, but all we can see here is only the upper body which is at least half or less than when it has legs. If we were to calculate the full size of unstabilized PS, this is how big it is:
You must be registered for see images
as you can see, Unstabilized PS is 168m. in a 1 meter = 100cm. so how much does 168m = cm? 16 800 centimetres
Jinton is only half the size of unstabilized PS but if we look at stabilized PS, jinton is a complete insect in front of it:
You must be registered for see images
Jinton is actually smaller than PS knees.
so to caculate the height of PS:
we add unstabalized PS height + jinton height
16 800 (Unstabalized PS) + 7200cm = 2400000cm. That's how big Madara's PS is.
therefore 100% kyuubi size would be:
16800 divided by 2 = 8400 because half of unstabalized PS is the size of 100% kyuubi so complete height of it needs to be halved so we know how tall 100% kyuubi is.
with that being said, Madara had to shrink the size of his PS so so so so much so it can fit the 100% kyuubi. However if we were to take a look at the difference between them, you would see this:
You must be registered for see images
You must be registered for see images
so PS is either twice or bigger than 100% kyuubi.
In the picture where the gokage are with the Susanoo clones you never took into account that the clones are further than the kages thus you can't use direct scaling than you did. I did the math in anotherYou must be registered for see linksand came up with a bit of a different number.
Given this information, all of your future numbers will change. Which makes sense considering the Raikage is over 2 meters tall yet he is represented as a dot in the scan with the roots. Given your previous measurements the roots would be 27.7m. The Jinton would be 443m. And Your perfect Susanoo would be 1,033.67m assuming your other calculations hold
Will do homie, I'll have it up in a few minutes.how about you do the calculations please:O. I can see you're very good at maths.
Lol indeed;
A few problems I've noted. Just based on all of this data.
In the picture where the gokage are with the Susanoo clones you never took into account that the clones are further than the kages thus you can't use direct scaling than you did. I did the math in anotherYou must be registered for see linksand came up with a bit of a different number.
Given this information, all of your future numbers will change. Which makes sense considering the Raikage is over 2 meters tall yet he is represented as a dot in the scan with the roots. Given your previous measurements the roots would be 27.7m. The Jinton would be 443m. And Your perfect Susanoo would be 1,033.67m assuming your other calculations holdmeh i guess you're right. Kishi isn't really accurate every time with his drawing sometimes so i was forced to choose the scans that helps my arugment and calculate them.
Shinshuu is 1-1.5Km.......... Yu just proved katsuya is about double Shinshu. I've calculated shinshu, so did you in another thread, and some other guy. All values came out to roughly 1Km when rounded off. You just showed katsuya is 2.5Km.Quite large, but still smaller than the Shinsuusenju.