Crutch Kaguya
Active member
Awards
No, explain it the same way you explained the final usage of Rasengan except this time describe the modifications that were made to each step to accommodate the change in power and size.
[Ninjutsu] Vēx
- Thread starter Vex
- Start date
I start by holding my right hand outwards, I then gather my raw chakra throughout my entire body and start channeling it all to the palm of my right hand, I then release several streams of the chakra out of the palm of my hand and start rotating it in a clockwise direction at first before having rotate in all directions at simultaneously, I then add an extra large amount of chakra and compress it while adding more force into the technique so that the impact would blast a hole through anything it hits directly, along with that I increase the potency of the chakra as more is added and compressed, I then make use of my left hand to shape the rotating chakra into a ball shaped figure/sphere, and keep maintaining the force of the chakra while compressing it to maintain its shape, I then maintain a certain density until the rasengan is perfectly formed within the palm of my right hand, I then further channel more chakra into the initial Rasengan and increase its size by shaping it into a larger ball, as more chakra is constantly being released, I have it rotate more as I compress the chakra forming a much larger Rasengan than the usual.
I hold my left hand out, and focus chakra from all points in my body. I charge the chakra into the surface of my palm, and begin to make it all rotate in one direction to the right. It rotates slowly, but I increase the speed more and more every second until finally the chakra is rotating extremely quickly. As I increase the speed, I am also making it rotate in more and more directions. As it is now rotating quickly, and in several directions. I then begin to pour in even more chakra, making it much more dense. I keep adding chakra, condensing it more and more. I keep doing this, even more than for the last rasengan. I then use my left hand to stabalize the chakra, moulding it into the shape of a sphere. I make sure to make the sphere much bigger than last time. Finally, I am holding an even larger version of the last rasengan.
Crutch Kaguya
Active member
Awards
I told you to describe the modifications that were made to each step to accommodate the change in power and size. You did not do that. Repeat Oodama Rasengan again, along with the final stage of Rasengan below the same way I wanted Oodama Rasengan. I will keep making you repeat these two techs until the description is satisfactory.
The final state of Rasengan is adding both shape and nature manipulate to the the technique. The technique as it currently holds uses only shape manipulation to contain the rotation within the thin membrane the user images to contain the chakra causing it to rotate faster and faster. The user can increase the power of the Rasengan by adding an elemental affinity to the Rasengan which works with the shape manipulation to transcend to higher levels of power. First, choose the element that is your affinity as that will be the easiest for you to incorporate with the technique. While adding shape manipulation to the sphere also use nature manipulation to turn that chakra into a different element.
This technique is much more advanced then the regular Rasengan. Unlike the previous which only requires you to do two things, compress the chakra and rotate the chakra, this Rasengan requires you to do three things. The third obviously being to transform the chakra. It results in much more stress in your chakra system and requires much greater precision and chakra control. I want you to create two shadow clones to help you perform the technique. Your main body will release the chakra, let one of your clones manipulate the shape of the chakra while another clone transforms the nature of the chakra into your elemental affinity. Once you can perform the technique with your clones, then use the technique by yourself.
Elemental Rasengan
Rank:S
Type:Attack/Defence
Range:Short
Chakra Cost:N/A
Damage Points:N/A
Description: By combining the original Rasengan with an elemental affinity, a new Rasengan can be created that may produce a variety of effects.
Note:Must know rasengan
The final state of Rasengan is adding both shape and nature manipulate to the the technique. The technique as it currently holds uses only shape manipulation to contain the rotation within the thin membrane the user images to contain the chakra causing it to rotate faster and faster. The user can increase the power of the Rasengan by adding an elemental affinity to the Rasengan which works with the shape manipulation to transcend to higher levels of power. First, choose the element that is your affinity as that will be the easiest for you to incorporate with the technique. While adding shape manipulation to the sphere also use nature manipulation to turn that chakra into a different element.
This technique is much more advanced then the regular Rasengan. Unlike the previous which only requires you to do two things, compress the chakra and rotate the chakra, this Rasengan requires you to do three things. The third obviously being to transform the chakra. It results in much more stress in your chakra system and requires much greater precision and chakra control. I want you to create two shadow clones to help you perform the technique. Your main body will release the chakra, let one of your clones manipulate the shape of the chakra while another clone transforms the nature of the chakra into your elemental affinity. Once you can perform the technique with your clones, then use the technique by yourself.
Elemental Rasengan
Rank:S
Type:Attack/Defence
Range:Short
Chakra Cost:N/A
Damage Points:N/A
Description: By combining the original Rasengan with an elemental affinity, a new Rasengan can be created that may produce a variety of effects.
Note:Must know rasengan
Sorry about that XD
Oodama Rasengan
Step 1:
I hold out my left hand, and begin to charge up chakra into my hand. I add a lot of chakra, and begin to use my chakra control to rotate the chakra in a clockwise direction. I do this slowly at first, but keep adding chakra and making the chakra rotate faster and faster. As I increase the rotation speed, I make the chakra rotate in different directions. Eventually it is rotating at an extremely fast pace, and in many different directions.
Changes to Step 1:
Well, for this step I made sure to make the chakra spin faster than usual increasing it's rotational force. I also made sure to make the chakra spin in more directions than usual, increasing the overall area and/or size.
Step 2:
I then continue to add chakra to my left hand, making the swirling mass of chakra denser and denser. It becomes almost visible to the naked eye because it is so dense. However, it does not have a defined shape and would simply appear as a swirling mass of chakra. However, I keep adding more and more chakra than usual so that the rasengan is much more powerful than before.
Changes to Step 2:
For this step, I adding much more chakra than usual. It will make the rasengan much much denser, and more powerful. The rasengan should end up being larger than usual as well in step 3.
Step 3:
As I keep adding chakra to my left hand, I then move my right hand near my right hand. I then begin to use my right hand to shape the chakra into the shape of a large sphere. The sphere is much larger than the previous variation of the rasengan. All the chakra is more densely packed, so that it will do more damage.
Changes to Step 3:
I made the sphere much larger, and packed the chakra in the sphere much more densely making it extremely compacted. The sphere is also larger than the normal variation of the rasengan.
Elemental Rasengan:
Step 1:
I make the shadow clone handseal as I concentrate my chakra, and think of myself. I then create two shadow clones of myself identitical to me. I then hold out my right hand, and begin to pour chakra into the palm of my hand. I cause the chakra to rotate in one direction at first, but slowly I keep adding more and more chakra. As I increase the chakra, I also cause it to spin more and more and in more directions. Eventually, the chakra is spinning very quickly and in many directions.
Changes to Step 1:
During this step, I created the shadow clones. I created them now, so I didn't have to create them later (which would be much more difficult). There weren't many changes to the step itself. However, the chakra is spinning more rapidly than usual just like in the last step.
Step 2:
As the chakra is rotating, I look at my first clone and make a short nod. As I am pouring out the chakra and rotating it, he begins to compact the chakra, making it denser and denser. He keeps adding more and more chakra as he does this. When it is finally dense and compacted enough, and starts to add my chosen element. He adds a lot of water chakra to it, so that it also begins to rotate. It is now a swirling mass of dense water chakra.
Changes to Step 2:
I made the chakra denser than usual (or should I say my clone did >_>). He also added my chosen element which is water so that we now have a swirling mass of water chakra.
Step 3:
When that is done, my second clone begins to shape the chakra. He uses both his hands to do this, shaping it into a spherical shape in order to stabalize the moving chakra. It is now a sphere of rotating water and extremely compacted water chakra.
Changes to Step 3:
Weren't many changes to this step other than that the sphere was made of water chakra, and that a clone performed this step. Also, the sphere was much larger than usual.
The final elemental water rasengan looks like this:
Oodama Rasengan
Step 1:
I hold out my left hand, and begin to charge up chakra into my hand. I add a lot of chakra, and begin to use my chakra control to rotate the chakra in a clockwise direction. I do this slowly at first, but keep adding chakra and making the chakra rotate faster and faster. As I increase the rotation speed, I make the chakra rotate in different directions. Eventually it is rotating at an extremely fast pace, and in many different directions.
Changes to Step 1:
Well, for this step I made sure to make the chakra spin faster than usual increasing it's rotational force. I also made sure to make the chakra spin in more directions than usual, increasing the overall area and/or size.
Step 2:
I then continue to add chakra to my left hand, making the swirling mass of chakra denser and denser. It becomes almost visible to the naked eye because it is so dense. However, it does not have a defined shape and would simply appear as a swirling mass of chakra. However, I keep adding more and more chakra than usual so that the rasengan is much more powerful than before.
Changes to Step 2:
For this step, I adding much more chakra than usual. It will make the rasengan much much denser, and more powerful. The rasengan should end up being larger than usual as well in step 3.
Step 3:
As I keep adding chakra to my left hand, I then move my right hand near my right hand. I then begin to use my right hand to shape the chakra into the shape of a large sphere. The sphere is much larger than the previous variation of the rasengan. All the chakra is more densely packed, so that it will do more damage.
Changes to Step 3:
I made the sphere much larger, and packed the chakra in the sphere much more densely making it extremely compacted. The sphere is also larger than the normal variation of the rasengan.
Elemental Rasengan:
Step 1:
I make the shadow clone handseal as I concentrate my chakra, and think of myself. I then create two shadow clones of myself identitical to me. I then hold out my right hand, and begin to pour chakra into the palm of my hand. I cause the chakra to rotate in one direction at first, but slowly I keep adding more and more chakra. As I increase the chakra, I also cause it to spin more and more and in more directions. Eventually, the chakra is spinning very quickly and in many directions.
Changes to Step 1:
During this step, I created the shadow clones. I created them now, so I didn't have to create them later (which would be much more difficult). There weren't many changes to the step itself. However, the chakra is spinning more rapidly than usual just like in the last step.
Step 2:
As the chakra is rotating, I look at my first clone and make a short nod. As I am pouring out the chakra and rotating it, he begins to compact the chakra, making it denser and denser. He keeps adding more and more chakra as he does this. When it is finally dense and compacted enough, and starts to add my chosen element. He adds a lot of water chakra to it, so that it also begins to rotate. It is now a swirling mass of dense water chakra.
Changes to Step 2:
I made the chakra denser than usual (or should I say my clone did >_>). He also added my chosen element which is water so that we now have a swirling mass of water chakra.
Step 3:
When that is done, my second clone begins to shape the chakra. He uses both his hands to do this, shaping it into a spherical shape in order to stabalize the moving chakra. It is now a sphere of rotating water and extremely compacted water chakra.
Changes to Step 3:
Weren't many changes to this step other than that the sphere was made of water chakra, and that a clone performed this step. Also, the sphere was much larger than usual.
The final elemental water rasengan looks like this:
You must be registered for see images
Oodama Rasengan
Step 1: I start by gathering a large amount of my raw chakra throughout my entire body, I then hold my right and dominant hand outwards and start channeling the chakra into my right hand, I then start releasing great streams of my raw chakra and start focusing it to outside of the palm of my right hand, I then start rotating the chakra in a simple clockwise direction before having it rotate in all directions simultaneously, and more violently than the regular rasengan.
Changes to Step 1: The only difference in this step is more chakra is being released a long with having it rotate in more directions as well as more violently than usual.
Step 2: I then proceed to stream more chakra and start compress it into a sphere while adding more force into the technique so that the impact would blast a hole through anything and everything it hits directly, along with that I increase the potency of the chakra as more is added and compressed, as more force is being implemented into the chakra, I increase its size and amount and further compress it so that the size of the technique would be larger than usual.
Changes to Step 2: In this step the techniques force and potency is increased making the rotation slack, therefore more chakra is added and continuously compressed to form the larger rasengan that would give off a much larger impact than usual as well.
Step 3: I then make use of my left hand and start to shape the rotating chakra into a large ball shaped figure/sphere while still maintaining the force and impact of the chakra and compressing it to maintain its intended shape, as the rasengan starts to gain its regular shape I increase its shape as more and more chakra is streamed into the sphere along with the rotation and force of the technique, ultimately the Odama Rasengan would then take perfect form within the palm of my right hand.
Changes to Step 3: The shape of the technique was increased for this step as well as more chakra was added and compressed to maintain the force and impact along with the rotation, to accommodate the size of the technique.
Elemental Rasengan:
Step 1: I start by forming a single handseal while gathering my chakra throughout my entire body, I then maintain an image of myself and petition my chakra equally beside me on both sides with which to create 2 identical shadow clones of myself, I then released the focused chakra and 2 identical clones take shape beside me, I then hold out my right hand, and begin releasing streams of my chakra into the palm of my right hand, I then manipulate the chakra to rotate in a clockwise direction at first, before having it rotate in all directions simultaneously.
Changes to Step 1: There weren't many changes for this step except the two clones that were created to tend to the nature and shape manipulation.
Step 2: As the chakra is rotating within the palm of my right hand, I keep streaming more chakra out of my right hand and start adding more force and impact to my chakra to maintain a certain density, I then manipulate one of my clones to place his hands across my right hand, just above the incomplete technique, and I have him add the nature manipulation to the technique, seeing as I have a wind affinity, my clone starts streaming wind chakra into the technique.
Changes to Step 2: Instead of just the regular performance and raw chakra release, 1 of my clones were manipulated to add wind chakra into the technique as that is my affinity.
Step 3: I then manipulate my other clone into placing his hands across my right hand as well, my clone then places his hands across the technique and starts adding the shape manipulation, shaping it into a spherical shape in order to stabalize the constantly rotating chakra, with all that being completed the rasengan would take form, but instead of a regular rasengan this one has my affinity added to it, with the wind the impact of the rasengan is much stronger, faster as well as sharper, making the impact of this technique more powerful than usual.
Changes to Step 3: Not much changes were made in this step other than that the sphere was shaped regular with a slight touch of wind brewing outwards throughout the sphere and that a clone performed it.
The final elemental wind rasengan looks like this:
Thanks for the template Vex
Step 1: I start by gathering a large amount of my raw chakra throughout my entire body, I then hold my right and dominant hand outwards and start channeling the chakra into my right hand, I then start releasing great streams of my raw chakra and start focusing it to outside of the palm of my right hand, I then start rotating the chakra in a simple clockwise direction before having it rotate in all directions simultaneously, and more violently than the regular rasengan.
Changes to Step 1: The only difference in this step is more chakra is being released a long with having it rotate in more directions as well as more violently than usual.
Step 2: I then proceed to stream more chakra and start compress it into a sphere while adding more force into the technique so that the impact would blast a hole through anything and everything it hits directly, along with that I increase the potency of the chakra as more is added and compressed, as more force is being implemented into the chakra, I increase its size and amount and further compress it so that the size of the technique would be larger than usual.
Changes to Step 2: In this step the techniques force and potency is increased making the rotation slack, therefore more chakra is added and continuously compressed to form the larger rasengan that would give off a much larger impact than usual as well.
Step 3: I then make use of my left hand and start to shape the rotating chakra into a large ball shaped figure/sphere while still maintaining the force and impact of the chakra and compressing it to maintain its intended shape, as the rasengan starts to gain its regular shape I increase its shape as more and more chakra is streamed into the sphere along with the rotation and force of the technique, ultimately the Odama Rasengan would then take perfect form within the palm of my right hand.
Changes to Step 3: The shape of the technique was increased for this step as well as more chakra was added and compressed to maintain the force and impact along with the rotation, to accommodate the size of the technique.
Elemental Rasengan:
Step 1: I start by forming a single handseal while gathering my chakra throughout my entire body, I then maintain an image of myself and petition my chakra equally beside me on both sides with which to create 2 identical shadow clones of myself, I then released the focused chakra and 2 identical clones take shape beside me, I then hold out my right hand, and begin releasing streams of my chakra into the palm of my right hand, I then manipulate the chakra to rotate in a clockwise direction at first, before having it rotate in all directions simultaneously.
Changes to Step 1: There weren't many changes for this step except the two clones that were created to tend to the nature and shape manipulation.
Step 2: As the chakra is rotating within the palm of my right hand, I keep streaming more chakra out of my right hand and start adding more force and impact to my chakra to maintain a certain density, I then manipulate one of my clones to place his hands across my right hand, just above the incomplete technique, and I have him add the nature manipulation to the technique, seeing as I have a wind affinity, my clone starts streaming wind chakra into the technique.
Changes to Step 2: Instead of just the regular performance and raw chakra release, 1 of my clones were manipulated to add wind chakra into the technique as that is my affinity.
Step 3: I then manipulate my other clone into placing his hands across my right hand as well, my clone then places his hands across the technique and starts adding the shape manipulation, shaping it into a spherical shape in order to stabalize the constantly rotating chakra, with all that being completed the rasengan would take form, but instead of a regular rasengan this one has my affinity added to it, with the wind the impact of the rasengan is much stronger, faster as well as sharper, making the impact of this technique more powerful than usual.
Changes to Step 3: Not much changes were made in this step other than that the sphere was shaped regular with a slight touch of wind brewing outwards throughout the sphere and that a clone performed it.
The final elemental wind rasengan looks like this:
You must be registered for see images
Thanks for the template Vex