You must be registered for see images
The element of fire earth and wind. Here follows a short summary of the project, you may boil down a few sentences or points you wish to elaborate on. It's pretty straight-forward but still.
Removed Fuinjutsu entirely. And adding some S/W features.
Custom element Japanese name:You must be registered for see images
Porisuchiton
Custom element English name:
Polystyrene
The element is based on:
Wind + Earth + Fire
Facts that prove the element to be possible (in the manga context):
Polystyrene is one of the most commonly used plastics, mainly for usage of isolating buildings and used in the construction areas. Not only that, but the elements that build up polystyrene is hydrogen and carbon and both of these elements are found in the narutoverse in either other custom elements or seen in the manga context. I think there's even a very large possibility that the element is even shown in the manga as its also used in the fast-food industry as it is a great insulator of heat. This means that the mixture actually is present in the narutoverse.
How it works:
Polystyrene is made by hydrogen and carbon, creating a chemical compound that resembles that of both rubber and plastic. It is a natural insulator, like paper, plastic and rubber. While polystyrene can come in various shapes, this initial element is always going to have it formed by miniature pellets about 5mm thick. The surface of the pellets, or grains, are quite thick and even if the material is quite spongy, hard to squeeze together as they are pressurized by the wind element. The fire and earth release has almost always been necessary to compose excavate elements from underground and convert them to other materials that require heat and or pressure to be created. The regular carbon release is an example of that while the wind element is used to pressurize the pellets and give them an extremely dense composition. Polystyrene, like many other organic materials does decay but very slowly. It is easy to burn it however, and since the pellets are packed with pressurized wind they will burn very easily and consumed by the heat. However, polystyrene does have a very low thermal conductivity and for instances like boiling water or freezing temperatures it does have an advantage. It's not uncommon to have house isolation made from polystyrene for that reason. As pellets, the polystyrene has the capability of being manipulated like the sand release and effectively take any form the user wants really. The pellets can also travel quite fast and can be regarded as miniature bullets as far as impact goes. Since they very light they can be accelerated faster than normal sand or regular variations and thus exceeds in speed compared to those elements. At about 100 C, polystyrene faces it's glass transition and will become a sort of semi-fluid. Since it is highly pressurized in this release form, it outperforms regular soil and rock formations in terms of hardness. When grinded together, the pellets also creates thermal heat which can be used for a slightly burning application. Naturally, since it's an element that exists of components in the earths crust it can only be formed from the user directly or from the ground.
Existing Source Usage: The user will focus the wind, earth and fire chakra to produce polystyrene from existing sources of carbon and hydrogen. Using the wind and earth elements will gather the elements to produce the polystyrene while the fire element will be able to mix the two together along with the users chakra. The polystyrene will be formed underground as the carbon and hydrogen is mixed together. This means the user can chose to "erupt" polystyrene from underground and form it into different shapes. These constructions are most likely based on larger constructs such as pillars, plateaus, hills or other structures.
Self Source Creation Usage: The user will focus wind, earth and fire chakra into themselves in order to produce polystyrene through exhaling sources or extrude them from their body. It could be used to be able to take on greater blunt damage and "harden" the users body as well as creating hand-held items such as shields or weapons.
Jutsu Usage Examples:
(Porisuchiton: Yugudorashiru no Tsūru) - Polystyrene Release: Tools Of Yggdrasil
Type: Defensive/Offensive/Supplementary
Rank: D-S
Range: Short
Chakra: 10-40
Damage: 20-80
Description: The user forms a weapons, structures, shields well anything that they need made out of polystyrene. The user can either use earth as a source or themselves, forming it from their palms or from their entire body as a surge.
Note: A and S ranks require handseals, 2 and 3 respectively. B rank requires a single handseal.
Note: A rank variation can be used 4 times, S rank can be used 3 times.
Conditions to be able to use it:
Completed Wind, Earth, and Fire
Is weak to:
Fire
The pellets are dense since they are highly compressed with the wind element, this makes them very flammable and frankly explosive. High temperatures, that of above 100c is also bad news for polystyrene as it will melt and become uncontrollable by the user.
Water
Polystyrene is more dense than water but it's essentially carrying no weight against it and can thus easily be defeated by masses of water.
Is strong against:
Earth
Polystyrene in this form is more dense than naturally occuring earth and can pierce through it like the sand release.
Lightning
Polystyrene is a natural insulator and since each pellet is very pressurized and dense by the wind element, they cannot easily be blasted through by the lightning element.
Wind
The mass of polystyrene is greater than that of pure wind, the hardness and speed of each pellet can also pierce through hurricanes. Polystyrene can freeze but does so poorly and can therefore be considered strong toward cold applications of wind as well, such as ice, dry ice etc. Sound is basically vibrating wind and faces the same fate.
Dark
Polystyrene is solid and is not easily absorbed through the applications of dark release.
Co-creator:
Gajeel Redfox
Students I passed this custom element on too: ? & ?
☣ P a t e n t C e r t i f i c a t e ☣
I, Joestar, moderator of the Custom Elements Bureau, declare for all men to hear that I give you the following:Skorm, our loyal member, gave on the date March 2nd 2019, a request for a Patent on his custom element (Porisuchiton); after reading the submission, I decided that the submitted element satisfies all requirements, and am therefore giving him his rightfully earned Patent on this element by the following;Porisuchiton
Powered by Lord of Kaos
Copyright © 2019, Skorm, AnimeBase.me
Note: Edited the CE slightly; removed the strength to Magnetism. Being non-magnetic isn't enough of a reason to be strong to Magnet Release. Water isn't magnetic, yet isn't strong to it. Nothing in your CE warrants it being anything but neutral to magnetism.
Key takeaways:
Polystyrene is made by hydrogen and carbon, creating a chemical compound that resembles that of both rubber and plastic. It is a natural insulator, like paper, plastic and rubber. While polystyrene can come in various shapes, this initial element is always going to have it formed by miniature pellets about 5mm thick. The surface of the pellets, or grains, are quite thick and even if the material is quite spongy, hard to squeeze together as they are pressurized by the wind element.
Polystyrene, like many other organic materials does decay but very slowly. It is easy to burn it however, and since the pellets are packed with pressurized wind they will burn very easily and consumed by the heat. However, polystyrene does have a very low thermal conductivity and for instances like boiling water or freezing temperatures it does have an advantage. It's not uncommon to have house isolation made from polystyrene for that reason. As pellets, the polystyrene has the capability of being manipulated like the sand release and effectively take any form the user wants really. The pellets can also travel quite fast and can be regarded as miniature bullets as far as impact goes.
Since they very light they can be accelerated faster than normal sand or regular variations and thus exceeds in speed compared to those elements. At about 100 C, polystyrene faces it's glass transition and will become a sort of semi-fluid. Since it is highly pressurized in this release form, it outperforms regular soil and rock formations in terms of hardness. When grinded together, the pellets also creates thermal heat which can be used for a slightly burning application. Naturally, since it's an element that exists of components in the earths crust it can only be formed from the user directly or from the ground.
Is weak to:
Fire
The pellets are dense since they are highly compressed with the wind element, this makes them very flammable and frankly explosive. High temperatures, that of above 100c is also bad news for polystyrene as it will melt and become uncontrollable by the user.
Water
Polystyrene is more dense than water but it's essentially carrying no weight against it and can thus easily be defeated by masses of water.
Is strong against:
Earth
Polystyrene in this form is more dense than naturally occuring earth and can pierce through it like the sand release.
Lightning
Polystyrene is a natural insulator and since each pellet is very pressurized and dense by the wind element, they cannot easily be blasted through by the lightning element.
Wind
The mass of polystyrene is greater than that of pure wind, the hardness and speed of each pellet can also pierce through hurricanes. Polystyrene can freeze but does so poorly and can therefore be considered strong toward cold applications of wind as well, such as ice, dry ice etc. Sound is basically vibrating wind and faces the same fate.
Dark
Polystyrene is solid and is not easily absorbed through the applications of dark release.
That being said, any questions?
@Karui.