Reply to thread

Message: [QUOTE="Troi, post: 22062064, member: 204285"]Polystyrene Release <img src="https://i.gifer.com/LPOO.gif" data-url="https://i.gifer.com/LPOO.gif" class="bbImage " style="" alt="" title="" /> [SPOILER="Polystyrene Release Description"]Custom element Japanese name:PorisuchitonCustom element English name:PolystyreneThe element is based on:Wind + Earth + FireFacts that prove the element to be possible (in the manga context):Polystyrene is one of the most commonly used plastics, mainly for usage of isolating buildings and used in the construction areas. Not only that, but the elements that build up polystyrene is hydrogen and carbon and both of these elements are found in the narutoverse in either other custom elements or seen in the manga context. I think there's even a very large possibility that the element is even shown in the manga as its also used in the fast-food industry as it is a great insulator of heat. This means that the mixture actually is present in the narutoverse.How it works:Polystyrene is made by hydrogen and carbon, creating a chemical compound that resembles that of both rubber and plastic. It is a natural insulator, like paper, plastic and rubber. While polystyrene can come in various shapes, this initial element is always going to have it formed by miniature pellets about 5mm thick. The surface of the pellets, or grains, are quite thick and even if the material is quite spongy, hard to squeeze together as they are pressurized by the wind element. The fire and earth release has almost always been necessary to compose excavate elements from underground and convert them to other materials that require heat and or pressure to be created. The regular carbon release is an example of that while the wind element is used to pressurize the pellets and give them an extremely dense composition. Polystyrene, like many other organic materials does decay but very slowly. It is easy to burn it however, and since the pellets are packed with pressurized wind they will burn very easily and consumed by the heat. However, polystyrene does have a very low thermal conductivity and for instances like boiling water or freezing temperatures it does have an advantage. It's not uncommon to have house isolation made from polystyrene for that reason. As pellets, the polystyrene has the capability of being manipulated like the sand release and effectively take any form the user wants really. The pellets can also travel quite fast and can be regarded as miniature bullets as far as impact goes. Since they very light they can be accelerated faster than normal sand or regular variations and thus exceeds in speed compared to those elements. At about 100 C, polystyrene faces it's glass transition and will become a sort of semi-fluid. Since it is highly pressurized in this release form, it outperforms regular soil and rock formations in terms of hardness. When grinded together, the pellets also creates thermal heat which can be used for a slightly burning application. Naturally, since it's an element that exists of components in the earths crust it can only be formed from the user directly or from the ground.Existing Source Usage: The user will focus the wind, earth and fire chakra to produce polystyrene from existing sources of carbon and hydrogen. Using the wind and earth elements will gather the elements to produce the polystyrene while the fire element will be able to mix the two together along with the users chakra. The polystyrene will be formed underground as the carbon and hydrogen is mixed together. This means the user can chose to "erupt" polystyrene from underground and form it into different shapes. These constructions are most likely based on larger constructs such as pillars, plateaus, hills or other structures.Self Source Creation Usage: The user will focus wind, earth and fire chakra into themselves in order to produce polystyrene through exhaling sources or extrude them from their body. It could be used to be able to take on greater blunt damage and "harden" the users body as well as creating hand-held items such as shields or weapons.Jutsu Usage Examples:(Porisuchiton: Yugudorashiru no Tsūru) - Polystyrene Release: Tools Of YggdrasilConditions to be able to use it:Completed Wind, Earth, and FireIs weak to:FireThe pellets are dense since they are highly compressed with the wind element, this makes them very flammable and frankly explosive. High temperatures, that of above 100c is also bad news for polystyrene as it will melt and become uncontrollable by the user.WaterPolystyrene is more dense than water but it's essentially carrying no weight against it and can thus easily be defeated by masses of water.Is strong against:EarthPolystyrene in this form is more dense than naturally occuring earth and can pierce through it like the sand release.LightningPolystyrene is a natural insulator and since each pellet is very pressurized and dense by the wind element, they cannot easily be blasted through by the lightning element.WindThe mass of polystyrene is greater than that of pure wind, the hardness and speed of each pellet can also pierce through hurricanes. Polystyrene can freeze but does so poorly and can therefore be considered strong toward cold applications of wind as well, such as ice, dry ice etc. Sound is basically vibrating wind and faces the same fate.DarkPolystyrene is solid and is not easily absorbed through the applications of dark release.Co-creator:Gajeel RedfoxStudents I passed this custom element on too: ? & ? [/SPOILER][SPOILER="(Porisuchiton: Tesserakuto | Polystyrene Release: Tesseract)"]Type: Offensive/Defensive/SupplementaryRank: S-rankRange: N/AChakra: 40(-20/turn)Damage: N/ADescription: Tesseract is an advanced application of the porisuchiton release and lets the user take the form of the initial release to benefit from its S/W upon facing a jutsu or otherwise. The user will transform themselves into polystyrene pellets while still maintaining their original size they become extremely light, sturdy and fast but also sharp. This is an extremely good technique when the user needs to move fast and having to tank jutsus that porisuchiton is strong to. The user will become stretchable as they are now in a "white sand" form and while their charactersics such as facial appearance etc has dissolved in the new form they still pertain the same volume. However, due to the extremely light material the user now consists of they can move at exremely fast speeds, up to twice their normal speed while gaining extreme flexibility of evading techniques. The pellets can also grind techniques that passes through the user to dust(within reason and S/W of porisuchiton). The downside of the technique is that the user cannot perform any elemental techniques except from porisuchiton/fire/earth/wind techniques. The user can reform at any time and if they continue to be in this form they need to spend additional chakra.Note: Usable twice per battle, lasting up to three turns per use.Note: No A rank and above Porisuchiton and no S rank and above Fire/Earth/Wind techniques after usage.Note: Can only be taught by Skorm.Note: Can only be used to dodge techniques(within reason) once per turn.[/SPOILER][SPOILER="(Porisuchiton: Jūryoku o Ushinau | Polystyrene Release: Gravity Forfeit)"]Type: OffensiveRank: S-rankRange: Short-LongChakra: 40(-20/turn)Damage: 80(+20/in combinations)Description: The user performs three handseals and then slams their hands on the ground. They will then channel massive amounts of porisuchiton chakra through it to gather up a miniature sea of the material underneath a certain area. This amount of polystyrene will then replace the earth underneath the target and due to the lightness of pomystyrene, most targets will fall through the material down to a depth of several meters. As they fall, the surrounding pellets will smack into them with high speeds and crush them into a pulp, similar to some sand techniques. This technique can be sustained at the cost of additional chakra. The technique gains extra damage if the user adds weight into the crater to push the polystyrene down on the target harder and thus gains a +20 dmg boost if combined with earth/water or other heavy elements that can be concentrated into the pit.Note: Can be sustained for up to three turns per use.Note: The user is only able to use earth/fire/wind- based elements up to A-rank while sustaining this technique.Note: Requires a cooldown of two turns and can only be used twice per battle.Note: Can only be taught by Skorm.Note: No Polystyrene Above A-rank after this technique ends.[/SPOILER][SPOILER="(Porisuchiton/Fūinjutsu: Riddiculus | Polystyrene Release/Sealing Arts: Riddiculus)"]Type: SupplementaryRank: S rankRange: N/AChakra: 40Damage: 80Description: This technique is simple but very effective. The user places a seal that contains compressed polystyrene quantities inside of it on a physical object and when it is triggered the mass of polystyrene will expand rapidly and while it does deal blunt damage it will also create a knockback AoE effect towards the area affected by its expanse. Because of the shock absorbing and repelling properties of polystyrene the concentrated mass will behave like a huge spherical trampoline and knock everything back in the opposite direction of their relation to where the expansive mass of polystyrene originates from. The mass expands up to mid range from wherever the seal activates from in a huge sphere. The seal is the source of the mass and so the seal and anything that the seal touches initially is unharmes as the mass expands from the top of the seal. This makes it ideal for protecting goods or make a troll kunai for example. The user cannot use polystyrene techniques above B rank while the seal is in place, active or not as well as hindering the user from fuinjutsu above A rank. The mass will disperse after being on the field for one turn. The seal is triggered by spending a move and performing three hand seals.Note: Can be used 4 times per battle and requires two turns after one seal is triggered and a new seal can be placed. The user can only have one seal active on the field at one time.Note: The user can passively place the seal but to activate the seal requires a move.[/SPOILER](Fuuinjutsu/Porisuchiton: Torasoruteotoru Sūhai) - • Sealing Arts/Polystyrene Release: Tlazolteotl's Adoration •[SPOILER]Type: Offensive/Defensive/SupplementaryRank: ARange: Short | Short-LongChakra: 30Damage: 60Description: Tlazolteotl's Adoration is a technique in which a seal is placed on a custom weapon or tool of the user's choice. Upon the command of the user or the seal being touched by excess foreign chakra, the seal will release an enormous amount of polystyrene at a rapid pace which can either be soft or hard upon release by nature. This polystyrene can be bent to the user’s will to harden or soften upon the user’s command as well as the user being able to mold this into whatever they please. Things such as walls, spikes, orbs, etc. The seal creates enough excess polystyrene for there to be a source left on the ground from the activation of the seal. These constructs can be no larger than 5x5 meters in size. Although this technique is to protect the user and protect their weaponry from being taken by others without consent and consequence, it can also serve as protection such as if the user is falling from a great height, the seal can be activated and soft polystyrene can pour out and cushion the user’s fall. So the technique and seal is quite useful in many ways. The seal can be activated every other turn and is of course an active technique used in that turn. Usable four times per battle. Note: Must be posted on user’s bio and state what it is placed on.Note: Requires one turn cooldown after use [/SPOILER]Approved here [<a href="https://animebase.me/threads/custom-element-bureau.764498/page-3#post-21915452">x</a>][/QUOTE]

Name

Verification