Hello, I'm going to show you the shading technique that i use for my pic's
The tools:
The process, step by step:
Draw your pic with the mecha pencil .05
(Do every detail so you don’t miss nothing)
Re-trace it with the Tech Pen.
(Be careful cause if you mess up you have to start up again.)
Start with the shade Process using the Mecha Pencil.07
(Don’t press the pencil too much, it has to be layered)
Use a tissue or paper towel or whatever you want to smooth the first layer.
(Don`t worry about cleaning it still, you can do that at the end)
After you get the big picture off what you pic is going to be...
you do another layer with the Mecha Pencil .07 again and again until you`re satisfied with it.
The last part, cleaning your pic.
(You can use the Mecha Eraser to do the brightness on the eyes or other effects.)
The tools that i use are the one that i have at hand, this process can be use with any other type of Pencils
This is the most simple way of doing this process, like I’ve posted before it's simple but you have to get it right or it may not end up like you have wanted it to..
That's it..
Have fun with it..
The tools:
zebra mechanical pencil .05
zebra drafix mechanical pencil .07
Technical Pen 0.5
Mechanical eraser
You must be registered for see images
zebra drafix mechanical pencil .07
You must be registered for see images
Technical Pen 0.5
You must be registered for see images
Mechanical eraser
You must be registered for see images
Draw your pic with the mecha pencil .05
(Do every detail so you don’t miss nothing)
You must be registered for see images
Re-trace it with the Tech Pen.
(Be careful cause if you mess up you have to start up again.)
Trace the shadows very lightly so you can view were they going to be.
You must be registered for see images
Start with the shade Process using the Mecha Pencil.07
(Don’t press the pencil too much, it has to be layered)
You must be registered for see images
Use a tissue or paper towel or whatever you want to smooth the first layer.
(Don`t worry about cleaning it still, you can do that at the end)
You must be registered for see images
After you get the big picture off what you pic is going to be...
you do another layer with the Mecha Pencil .07 again and again until you`re satisfied with it.
You must be registered for see images
The last part, cleaning your pic.
(You can use the Mecha Eraser to do the brightness on the eyes or other effects.)
You must be registered for see images
The tools that i use are the one that i have at hand, this process can be use with any other type of Pencils
This is the most simple way of doing this process, like I’ve posted before it's simple but you have to get it right or it may not end up like you have wanted it to..
That's it..
Have fun with it..
Last edited by a moderator: